Atlas Sound XLTE owner manual Technical Specifications, 11.1FULL-RANGEMODELS

11 TECHNICAL SPECIFICATIONS

(Note: Specifications subject to change without notice)

11.1FULL-RANGE MODELS

	Model:	42	43	46	47
System Type		2-Way Trapezoidal	2-Way Trapezoidal	3-Way Trapezoidal	2-Way Trapezoidal
Frequency Response		70 Hz - 18 kHz	50 Hz - 18 kHz	50 Hz - 18 kHz	50 Hz - 18 kHz
Sensitivity (1W / 1m SPL)		97 dB	98 dB	99 dB	101 dB
Max. Power (RMS / Program)
Passive Mode		200 W / 500 W	200 W / 500 W	200 W / 500 W	400 W / 1000 W
Biamp Mode	LF	200 W / 500 W	200 W / 500 W	200 W / 500 W	400 W / 1000 W
	HF	50 W / 125 W	50 W / 125 W	80 W / 200 W	50 W / 125 W
Impedance
Passive Mode		8 Ohms (min 5.6)	8 Ohms (min 5.3)	4 Ohms (min 5.1)	4 Ohms (min 3.2)
Biamp Mode: LF		8 Ohms (min 5.6)	8 Ohms (min 5.3)	4 Ohms (min 5.1)	4 Ohms (min 3.2)
	HF	8 Ohms	8 Ohms	8 Ohms	8 Ohms
Nominal Coverage H x V		90° x 40° 1	90° x 40°	60° x 40° 1	80° x 40°
Crossover:	Type	12 dB/octave	12 dB/octave	12 dB/octave	12 dB/octave
	Frequency	2 kHz	2 kHz	500 Hz / 2.5 kHz	1.8 kHz
Passive/Biamp Switch		Yes	Yes	Yes	Yes
HF Level Switch		+4 dB / Flat	+4 dB / Flat	+4 dB / Flat	+4 dB / Flat
PowerSense™ DDP 2		Yes	Yes	Yes	Yes
With Front / Rear Indication
Drivers	HF 3	1" / 25 mm Titanium	1" / 25 mm Titanium	1" / 25 mm Titanium	1" / 25 mm Titanium
	MF	N/A	N/A	6.5" / 165 mm Cone	N/A
	LF	12" / 305 mm	15" / 381 mm	15" / 381 mm	2 x 15" / 381 mm
Input Connectors
Neutrik NL4MP (Passive / Biamp)		(2) In parallel	(2) In parallel	(2) In parallel	(2) In parallel
1/4” Jack (Passive Mode only)		(2) In parallel	(2) In parallel	(2) In parallel	(2) In parallel
XLT Enclosure Material
	XLT	N/A	Oriented strand board	Oriented strand board	Oriented strand board
	XLTE	13-ply Baltic birch	13-ply Baltic birch	13-ply Baltic birch	13-ply Baltic birch
Mounting Points
XLT(5/16-18 threaded inserts)		N/A	Sides/top/bottom	Sides/top/bottom	Sides/top/bottom
XLTE (3/8-16 rig points)		3 top, 3 bottom	3 top, 3 bottom	3 top, 3 bottom	3 top, 3 bottom
Stand / Pole Socket		1-3/8” / 35 mm	1-3/8” / 35 mm	Attachment points	None
		diameter	diameter	for external socket
All-Steel Handles		One on end	One on each side	One on each side	One on each side
XLT Corner Protectors		N/A	Yes	Yes	Yes
XLTE Rubber Feet		Yes	Yes	Yes	Yes
Enclosure Finishes
	XLT	N/A	Black Carpet	Black Carpet	Black Carpet
	XLTE	Black Paint	Black Paint	Black Paint	Black Paint
Grille	Material	16 Gauge perf steel	16 Gauge perf steel	16 Gauge perf steel	16 Gauge perf steel
	Finish	Black paint	Black paint	Black paint	Black paint
Dimensions 4	Height	23.4" / 618 mm	26.9" / 684 mm	33.9" / 862 mm	41.9" / 1065 mm
	Width (front)	14.6" / 371 mm	20.3" / 515 mm	20.3" / 515 mm	20.3" / 515 mm
		9.2" / 234 mm	13.7" / 347 mm	13.7" / 347 mm	13.7" / 347 mm
	Width (rear)
		14.75" / 375 mm	18.2" / 463 mm	18.2" / 463 mm	18.2" / 463 mm
	Depth
Pitch between sides		22 degrees	22 degrees	22 degrees	22 degrees
Weight	XLT	N/A	68.5 lb. / 31.1 kg	86.5 lb. / 39.2 kg	102 lb. / 46.3 kg
	XLTE	53.5 lb. / 24.3 kg	68.5 lb. / 31.1 kg	85 lb. / 38.6 kg	95 lb. / 43.1 kg

1Horn can be rotated 90 degrees to reverse horizontal and vertical coverage pattern.

2DDP = Dynamic Driver Protection.

3Driver has as 2” diameter diaphragm and 1” exit.

4Dimensions are for XLT models including corners. XLTE dimensions will vary up to approximately +/- 0.5 in. (+/- 13 mm) from those listed. Model 42 is correct because it is only available as part of the XLTE Series.

PAGE 36 Community XLT / XLTE Series Owner’s Manual