Pin Number
1Y (Luminance signal)
2Pb (Color differential signal)
3Pr (Color differential signal)
Universal Serial Bus (USB) Interface
NOTE: This monitor supports
Transfer speed | Data Rate | Power Consumption |
|
|
|
High speed | 480 Mbps | 2.5 W (Max., each port) |
Full speed | 12 Mbps | 2.5 W (Max., each port) |
|
|
|
Low speed | 1.5 Mbps | 2.5 W (Max., each port) |
|
|
|
USB Upstream Connector
Pin Number 4-pin Side of the Connector
1DMU
2VCC
3DPU
4GND
USB Downstream Connector
Pin Number |
|
1VCC
2DMD
3DPD
4GND
USB Ports
•1 upstream - back
•4 downstream - 2 on back; 2 on left side
NOTE: USB 2.0 functionality requires a USB
NOTE: The monitor's USB interface works only when the monitor is on or in power save mode. If you turn off the monitor and then turn it on, the attached pe take a few seconds to resume normal functionality.
Plug and Play Capability
You can install the monitor in any Plug and