Dell 4688513 Display Settings, Wide Mode, Horizontal Position, Vertical Position, Sharpness

Display Settings	Use the Display Settings to adjust image.
Wide Mode	Adjust the image ratio as 16:9, 4:3, 1:1, Aspect or full screen.
Horizontal Position
	Use the	or	to adjust image left or right. Minimum is '0' (-). Maximum is '100' (+).
Vertical Position
	Use the	or	to adjust image up or down. Minimum is '0' (-). Maximum is '100' (+).
	NOTE: Horizontal Position and Vertical Position Adjustments are only available for "VGA" input.
Sharpness
	This feature can make the image look sharper or softer. Use			or	to adjust the sharpness from '0' to '100'.
Noise Reduction	Improve the motion picture quality by reducing noise on image edge.
	NOTE: Noise Reduction is only available for Multimedia, Game and Movie modes.
Pixel Clock	The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.
	Use the	or	to adjust for best image quality.
Phase	If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phas
	(fine), again.
	NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.
Dynamic Contrast	Allows you to increase the level of contrast to provide sharper and more detailed image quality. (Brightness control is disabled
	in Dynamic Contrast mode and will be grayed out.)
	Touch the		button to select the Dynamic Contrast "On" or "Off" .
	NOTE: Dynamic Contrast is only available for Game and Movie color preset modes.
Display Info	Displays the monitor's current settings.
Reset Display	Select this option to restore default display settings.
Settings
Audio Settings	Select this option to adjust the audio settings.
Line Out Source	Use the Line Out Source menu to select between different audio signals that may be connected to your monitor.