Dell 4688513 appendix Organizing Your Cables, Attaching the Soundbar Optional

Page 33

NOTE: The graphics are used for the purpose of illustration only. Appearance of the computer may vary.

After you have completed connecting the DVI/VGA/DisplayPort cable, follow the procedure below to complete your monitor setup:

1.Plug the power cables for your computer and monitor into a nearby outlet.

2.Turn on the monitor and the computer.

If your monitor displays an image, installation is complete. If it does not display an image, see Solving Problems.

3.Use the cable slot on the monitor stand to organize the cables.

Organizing Your Cables

After attaching all necessary cables to your monitor and computer, (See Connecting Your Monitor for cable attachment,) use the cable management slot to organize all cables as shown above.

Attaching the Soundbar (Optional)

To attach the Soundbar:

1.Working from the back of the monitor, attach the Soundbar by aligning the two slots with the two tabs along the bottom of the monitor.

2.Slide the Soundbar to the left until it snaps into place.

3.Connect the Soundbar with the DC power connector.

4.Insert the mini stereo plug from the back of the Soundbar into the computer's audio output jack.

Image 33

Contents Dell U3011 Flat Panel Monitor Users Guide About Your Monitor Package ContentsIdentifying Parts and Controls Product FeaturesFront View Front View Front panel controls Label DescriptionBack View Side ViewLeft view Right view Label Description Monitor Specifications Flat Panel SpecificationsBottom View Preset Display Modes Resolution SpecificationsElectrical Specifications Supported Video ModesEnvironmental Characteristics Physical CharacteristicsPin Number 15-pin Side of the Connected Signal Cable Power Management ModesPin Assignments Thermal dissipationPin Number 20-pin Side of the Connected Signal Cable DVI ConnectorPin Hdmi Connector Pin Number 4-pin Side of the Connector Transfer speed Data Rate Power ConsumptionPin Number Pin Side of the Signal Cable Universal Serial Bus USB InterfaceMaintenance Guidelines Card Reader SpecificationsCleaning Your Monitor LCD Monitor Quality and Pixel PolicyBack to Contents Appendix Setting Up Your Monitor Click Change Display Settings Click Advanced Settings Operating the Monitor Using the Front Panel ControlsAccessing the Menu System Using the On-Screen Display OSD MenuPower With power light indicator ExitBrightness Auto AdjustContrast Input SourceColor Settings ComponentGamma Saturation HueWide Mode Display SettingsPhase Reset DisplayAudio Configurations Other Settings PBP ModeMenu Timer Power Save AudioLCD Conditioning OSD Warning MessagesVGA/DVI-D/DisplayPort/HDMI/Component input Setting the Maximum Resolution Using the Dell Soundbar OptionalClick Change Display Settings Using the Tilt, Swivel, and Vertical Extension Tilt, SwivelVertical Extension Page Setting Up Your Monitor Model U3011t July 2010 Rev. A00 Dell U3011 Flat Panel MonitorConnecting the Monitor Setting Up the MonitorAttaching the Soundbar Optional Organizing Your CablesAttaching the Stand Removing the StandTroubleshooting Built-in DiagnosticsSelf-Test Common Problems Common Symptoms What You Experience Possible SolutionsSupport.dell.com Product Specific Problems Universal Serial Bus USB Specific ProblemsSpecific Symptoms What You Experience Possible Solutions Dell Soundbar Problems