Dell 4688513 appendix Removing the Stand, Attaching the Stand

Page 34

CAUTION: Do not use with any device other than the Dell Soundbar.

NOTE: The Soundbar power connector (+12 V DC output) is for the optional Dell Soundbar only.

Removing the Stand

NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a soft, clean surface.

NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for setup instructions.

To remove the stand:

1.Place the monitor on a flat surface.

2.Remove the four screws from the stand.

3.Lift the stand up and away from the monitor.

Attaching the Stand

NOTE: This is applicable for a monitor with a stand. When any other stand is bought, please refer to the respective stand setup guide for setup instructions.

To attach the monitor stand:

1.Place the monitor on a flat surface.

2.Fit the two tabs on the upper part of the stand to the groove on the back of the monitor, lower the stand onto the back of the monitor.

3.Tighten the bolts as indicated.

Back to Contents Page

Image 34

Contents Dell U3011 Flat Panel Monitor Users Guide Package Contents About Your MonitorFront View Product FeaturesIdentifying Parts and Controls Front View Front panel controls Label DescriptionSide View Back ViewLeft view Right view Label Description Flat Panel Specifications Monitor SpecificationsBottom View Electrical Specifications Resolution SpecificationsPreset Display Modes Supported Video ModesPhysical Characteristics Environmental CharacteristicsPin Assignments Power Management ModesPin Number 15-pin Side of the Connected Signal Cable Thermal dissipationDVI Connector Pin Number 20-pin Side of the Connected Signal CablePin Hdmi Connector Pin Number Pin Side of the Signal Cable Transfer speed Data Rate Power ConsumptionPin Number 4-pin Side of the Connector Universal Serial Bus USB InterfaceCleaning Your Monitor Card Reader SpecificationsMaintenance Guidelines LCD Monitor Quality and Pixel PolicyBack to Contents Appendix Setting Up Your Monitor Click Change Display Settings Click Advanced Settings Using the Front Panel Controls Operating the MonitorPower With power light indicator Using the On-Screen Display OSD MenuAccessing the Menu System ExitContrast Auto AdjustBrightness Input SourceComponent Color SettingsGamma Hue SaturationPhase Display SettingsWide Mode Reset DisplayAudio Configurations Menu Timer PBP ModeOther Settings Power Save AudioOSD Warning Messages LCD ConditioningVGA/DVI-D/DisplayPort/HDMI/Component input Using the Dell Soundbar Optional Setting the Maximum ResolutionClick Change Display Settings Tilt, Swivel Using the Tilt, Swivel, and Vertical ExtensionVertical Extension Page Setting Up Your Monitor Dell U3011 Flat Panel Monitor Model U3011t July 2010 Rev. A00Setting Up the Monitor Connecting the MonitorOrganizing Your Cables Attaching the Soundbar OptionalRemoving the Stand Attaching the StandBuilt-in Diagnostics TroubleshootingSelf-Test Common Symptoms What You Experience Possible Solutions Common ProblemsSupport.dell.com Universal Serial Bus USB Specific Problems Product Specific ProblemsSpecific Symptoms What You Experience Possible Solutions Dell Soundbar Problems