5 | Exit the |
| Exit |
|
|
6 | Use the Power button to turn the monitor on and off. |
The blue LED indicates the monitor is on and fully functional. An amber LED indicates DPMS power save mode.
Power
(with power light indicator)
Using the On-Screen Display (OSD) Menu
Accessing the Menu System
NOTE: If you change the settings and then either proceed to another menu or exit the OSD menu, the monitor automatically saves those changes. The changes are also saved if you change the settings and then wait for the OSD menu to disappear.
1. Touch the 
button to launch the OSD menu and display the main menu.
Main Menu for analog (VGA) Input
NOTE: Auto Adjust is only available when you use the analog (VGA) connector.
2.Touch the 
or 
button to move between the setting options. As you move from one icon to another, the option name is highlighted. See the following table for a complete list of all the options available for the monitor.
3.Touch the 
button once to activate the highlighted option.
4.Touch the 
or 
button to select the desired parameter.
5.Touch the 
button to enter the slide bar and then use the 
and 
buttons, according to the indicators on the menu, to make your changes.
6.Touch the 
button to return to the main menu or 
to exit the OSD menu.
Icon | Menu and |
| Submenus |
|
|