Dell G2410H, G2410T appendix Other Settings

Back

Press

to go back to the main menu.

Horizontal Po

Use the

and

buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).

sition

NOTE: When using a DVI source, the Horizontal Position setting is not available.

Vertical Posit

Use the

and

buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).

ion

NOTE: When using a DVI source, the Vertical Position setting is not available.

Sharpness

This feature can make the image look sharper or softer. Use

or

to adjust the sharpness from '0' to '100'.

Pixel Clock

The Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.

Use the

and

buttons to adjust for best image quality.

Phase

If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fin

NOTE: Pixel Clock and Phase Adjustments are only available for "VGA" input.

Dynamic

The Dynamic Contrast adjustment helps the user to get a higher contrast if you choose Game preset, Movie Preset, Sports Preset an

Contrast

(Brightness control is disabled while in Dynamic Contrast mode and will be grayed out.)

Use the

button to enable the Dynamic Contrast adjustment.

Use the

button to disable the Dynamic Contrast adjustment.

NOTE: Dynamic Contrast is not available (greyed out) in Energy Smart Plus and Energy Smart modes.

Display Reset

Reset the image to the original factory setting.

Exit Menu

Press

to exit the OSD main menu.

OTHER

SETTINGS