Dell Complete Guide for G2410H Monitor Setup and Stand Removal

NOTICE: Do not use with any device other than Dell Soundbar.

1.Working from the rear of the monitor, attach the Dell Soundbar by aligning the two slots with the two tabs along the bottom rear of the monitor.

2.Slide the Dell Soundbar to the left until it snaps into place.

3.Connect the Soundbar with the power brick.

4.Plug the power cables of the power brick into a nearby outlet.

5.Insert the lime-green mini stereo plug from the rear of the Soundbar into the computer's audio output jack.

Removing the Stand

NOTE: To prevent scratches on the LCD screen while removing the stand, ensure that the monitor is placed on a clean surface.

To remove the stand:

1.Press and hold the stand release button.

2.Lift the stand up and away from the monitor .

Wall Mounting (Optional)