Exit Menu
MENU
SETTINGS
Back
Language
Menu Horizontal
Position
Menu Vertical Position
Menu Timer
Transparency
Menu Rotation
Menu Lock
Factory Reset
DDC/CI
Exit Menu
PIP
SETTINGS
Push to exit the OSD main menu.
Push to go back to the main menu.
Language option to set the OSD display to one of five languages (English, Espanol, Francais, Deutsch, Japanese).
and buttons move OSD left and right.
and buttons move OSD up and down.
OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.
Use the and buttons to adjust the slider in 5 second increments, from 5 to 60 seconds.
This function is used to adjust the OSD background from opaque to transparent.
Rotates the OSD by 90 degrees
Controls user access to adjustments. When 'Yes' (+) is selected, no user adjustments are allowed. All buttons are lo
NOTE: When the OSD is locked, pressing the menu button will take the user directly to the OSD settings menu, with unlock and allow user access to all applicable settings.
Reset all OSD settings to the factory preset values.
DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) t disable this feature by selecting "Disable".
Enable this feature for best user experience and optimum performance of your monitor.
Push to exit the OSD main menu.
This function brings up a window displaying image from another input source.
PIP/PBP submenu when PIP/PBP OFF (main source is | PIP/PBP submenu when PI |