1INSTALLATION AND CONNECTION TO DVR
Installation
Call a specialist to install the unit. (Do not try to install the unit yourself.)
Use the following procedures to attach the external disc unit to the DVR.
Docking the unit with the DVR is useful.
zThe external disc unit and the DVR must be off before commencing the following procedures.
Preparing the external disc unit
1 Remove the four screws from the top of the external disc unit, and remove the cover.
Do not lose the four screws as they will be used later.
2 Use two screws (accessory) to attach the fitting (accessory) to the external disc unit.
Tightening torque: 0.6 N•m - 0.7 N•m
Screw
Fitting
Preparing the DVR
3 Turn the DVR upside down, and use a screwdriver to remove the leg (A).
(A)
4 Remove the four screws from the sides of the DVR, and remove the cover.
zIf the HDD is mounted in the slave position, remove the HDD block.
Slave position
OPERATION
Front panel side
6 | English |