Solving Problems 115
3From th e Language drop-down menu in the toolbar, select your
preferred language for the driver or utility (if available). A welcome
screen appears.
4Click Next.
The CD automatically scans your hardware to dete ct drivers and
utilities used by your computer.
5After the CD completes the hardware scan, you can also detect other
drivers and utilities. Under Search Criteria, select the appropriate
categories from the System Model, Operating System, and Top ic
drop-down menus.
A link or links appear(s) for the specific drivers and utilities used by
your computer.
6Click the link of a specific driver or utility to display information about
the driver or utility that you want to install.
7Click the Install button (if present) to begin installing the driver or
utility. At the welcome screen, follow the screen prompts to complete
the installation.
If no Install button is present, automatic installation is not an option.
For installation instructions, either see the appropriate instructions in
the following subsections, or click Extract, follow the extracting
instructions, and read the readme file.
If instructed to navigate to the driver files, click the CD directory on
the driver information window to display the files associated with that
driver.
Manually Reinstalling Drivers for Windows XP NOTE: If you are
reinstalling an infrared
sensor driver, you must
first enable the infrared
sensor in the system setup
program (see page 148)
before continuing with the
driver installation.
1After extracting the driver files to your hard drive as described in the
previous section, click the Start button, point to Settings, and click
Control Panel.
2Click the Start button and right-click My Computer.
3Click Properties.
4Click the Hardware tab and click Device Manager.
5Double-click the type of device for which you are installing the driver
(for example, Modems or Infrared devices).