NOTICE: Handle components and cards by their edges, and avoid touching pins and contacts. Ground yourself by touching a metal connector on the back of the computer. Continue to ground yourself periodically during this procedure.

7Turn the computer over.

8Loosen the captive screw from the Mini PCI card/modem cover, and remove the cover.

Mini PCI card/modem cover

captive screw

9If a Mini PCI card is not already installed, go to step 10. If you are replacing a Mini PCI card, remove the existing card:

a Disconnect the Mini PCI card from any attached cables.

b Release the Mini PCI card by spreading the metal securing tabs until the card pops up slightly.

c Lift the Mini PCI card out of its connector.

Adding and Replacing Parts

 

129

 

Page 129
Image 129
Dell 8500 manual Mini PCI card/modem cover Captive screw, 129