Dell 8500 manual Hard drive screw, 135

hard drive screw

NOTICE: When the hard drive is not in the computer, store it in protective antistatic packaging. For precautions on preventing electrostatic discharge, see page 11.

8Slide the hard drive out of the computer.

9Remove the new drive from its packaging.

Save the original packaging for storing or shipping the hard drive.

NOTICE: Use firm and even pressure to slide the drive into place. If you use excessive force, you may damage the connector.

10Slide the hard drive into the bay until it is fully seated.

11Replace and tighten the screw.

12Use the Operating System CD to install the operating system for your computer (see page 119).

13Use the Drivers and Utilities CD to install the drivers and utilities for your computer (see page 113).

Adding and Replacing Parts

135