Dell 8500 manual Securing clips Per connector Memory module, 126

w w w . d e l l . c o m s u p p o r t . d e l l . c o m

NOTE: If the memory module is not installed properly, the computer may not boot properly. No error message indicates this failure.

securing clips

(2 per connector)

memory module

NOTICE: If you need to install memory modules in two connectors, install a memory module in the connector labeled “DIMM A” before you install a module in the connector labeled “DIMM B.” Insert memory modules at a 45-degree angle to avoid damaging the connector.

9Ground yourself and install the new memory module:

a Align the notch in the module edge connector with the tab in the connector slot.

b Slide the module firmly into the slot at a 45-degree angle, and rotate the module down until it clicks into place. If you do not feel the click, remove the module and reinstall it.

126

Adding and Replacing Parts