Dell 1708FP appendix Side View

NOTE: You can use this connector only after you connect the USB cable to the computer and the USB upstream connector on the monitor.

Side View

USB connectors (downstream)

Left side Right side

Monitor Specifications

Power Management Modes

If you have VESA's DPM™ compliance display card or software installed in your PC, the monitor can automatically reduce its power consumption when not in use. This is referred to as 'Power Save Mode'*. If input from keyboard, mouse, or other input devices is detected by the computer, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature:

VESA Modes	Horizontal Sync	Vertical Sync	Video	Power Indicator	Power Consumption
Normal operation (with Dell Soundbar and USB active)	Active	Active	Active	Green	75	W (maximum)
Normal operation	Active	Active	Active	Green	35	W (typical)
Active-off mode	Inactive	Inactive	Blanked	Amber	Less than 2 W
Switch off	-	-	-	Off	Less than 1 W

NOTE: The OSD will only function in the 'normal operation' mode. One of the following messages will appear when the “menu” or “plus” buttons are pressed when in Active-off mode.

1. Auto Detect (Analog Input)		1. Auto Detect (Digital Input)
In Power Save Mode	or	In Power Save Mode
Press Computer Power Button		Press Computer Power Button
or Any Key on Keyboard or Move Mouse		or Any Key on Keyboard or Move Mouse
2. Analog Input		3. Digital Input
In Power Save Mode	or	In Power Save Mode
Press Computer Power Button		Press Computer Power Button
or Any Key on Keyboard or Move Mouse		or Any Key on Keyboard or Move Mouse

Activate the computer and 'wake up' the monitor to gain access to the OSD.

This monitor is ENERGY STAR®-compliant as well as TCO '99 / TCO '03 power management compatible.

* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.

Pin Assignments