Loading Media
Installing the Media Roll
Note: The Media Guides must be adjusted to match the width of the media you are using, (see Media Guide Adjustment). Once the Media Guides are set for the width of the media being used it is no longer necessary to perform this adjustment.
Note: It is important that the Windows Printer Driver 'Stock' setting matches the size of the label you are using. See the Windows Driver section.
1.Slide the Media Hanger Guides outwards until they lock in place.
2.Insert the roll of Media as shown. Gently push the left Media Hanger
Guide toward the rear of the printer so that it releases from the Catch. The Guides will then retract and grasp the media roll.
10