Datamax Ex2 manual

Page 8

4.Click on the “Communications” Tab, scroll to bottom for IP settings.

5.Set the IP, Mask, Gateway to your desired values.

6.Click the ‘Configure Printer” button to send the changed values to the printer.

7.Go to “User Functions” Tab and click the “Print Configuration” Button to confirm the

printer has received the new values.

8.Exit the DMXConfig program.

9.Power Off the printer and remove the parallel or serial connection. Connect the network cable to the printer and power on the printer.

The new IP address can then be used to browse to the printer's internal web pages for further configuration or used for installing the Windows Driver.

7

Image 8

Contents Page Printer Overview Connecting Power Printer ConnectionsInterface Connection Page Ethernet Setup Automatically Obtain an IP via a Dhcp ServerIP Address Subnet Mask Gateway Page Configure Settings via The Printers Internal Web Pages Page Installing the Media Roll Loading MediaPage Loading the Peel and Present Option Page Fan-fold / External Supply Loading Continuous Label Media Media SetupMedia Setup Windows Printer Driver Reflective Mark Label Media Status Light Flashing Paused or Error Condition Printer ResetPrinter Operation Status Light On Normal OperationMaintenance Mode Installing the Windows Driver Windows DriverSetup Tab Stock Important NotesDMXConfig Features Printer Configuration Utility DMXConfigInstalling DMXConfig Area Method Interval Maintenance and AdjustmentsCleaning Intervals Printhead Cleaning Printhead Pressure Adjustment Low Medium HighMedia Guide Adjustment Too Tight Correct