Mamiya RZ67 Pro II Body Only manual Mamiya RZ67 PRO II Specifications, Film type

Mamiya RZ67 PRO II Specifications

Camera Type :6 X 7 cm roll film SLR with lens shutter.

Film Holder :120 Roll Film Holder HA703 ---the standard holder

	220 Roll Film Holder HB702	] interchangeable
	6x4.5 120 Roll Film Holder RZ
	Polaroid Pack Film Holder HP702
Film type	:120 film (120 Roll Film Holder HA703) (10 exposure) /120 film

(6x4.5 120 Roll Film Holder RZ) (15 exposures) /220 film (220 Roll Film Holder HB702) (20 exposure) / Instant film (Polaroid

Pack Film Holder HP702)

Negative size:6x7 cm format: 56x69.5 mm / 6x4.5 cm format: 56x41.5 mm / Polaroid Pack: 70x70 mm

Revolving Back: The back revolves 90° to change from the horizontal to vertical format or vice versa. Viewfinder format automatically changes as back revolves.

Lens Mount :Special bayonet mount (with built-in safety lock)

Lens type :110mm f/2.8---the Standard Lenses/ Interchangeable RZ lenses/Interchangeable lenses for the RB can also be used.

Shutter :Seiko #1 electronic shutter

Shutter release: Body shutter release plus electronic shutter release contacts.

Shutter speed:1/400-8 sec. (with intermediate speeds), B, T (mechanical) / RBL (when the RB lens used) and AEF (when the AE Prism Finders used) positions / Mechanical shutter of 1/400 sec. usable.

Sync operation: with flash sync terminal (X-sync) on lens or hot shoe.

Multiple exposure: possible by means of R-M lever.

Focusing Screen: Type A Matte is the standard / Focusing screens for the RZ are interchangeable.

Viewfinder :Waist-Level Finder FW702 is the standard interchangeable with the AE Prism Finder FE701 / Finders for the RZ and RB can also be used.

Percentage of the field of view visible:95% This information is based on a linear (horizontal / vertical) measurement.

Film Transport:A single 114° stroke of the Cocking Lever advances the film and Exposure Counter, sets the Mirror and Light Baffle, and cocks the shutter.

Focusing Method: The Rack and pinion focusing extends the built-in bellows up to a maximum of 46 mm /Equipped with a Focusing Knob and Lock Lever/ With subject distance and exposure factor indications.

Winder :RZ Winder II (RZ Winder I cannot be used)

Cable release contact:The shutter can be released by mean of a cable release connected to a contact on the camera body / Remote control is possible by means of a receiver connected to the same contact.

Battery Type: One alkaline-manganese battery (4LR44) or silver oxide Bat- tery (4SR44) to operate the body / Six AA size Ni-Cd

batteries or one special AC adapter (DC9V) for driving the winder.

Safety features (in normal shutter release operation):

• Viewfinder display (by LEDs and pictorial symbols):

Warning on incomplete cocking lever setting / Warning on failure to pull out the dark slide / Battery check.

•Electronic alarm sound when : The shutter speed dial is at the "RBL" position when an RZ lens is used /The shutter dial is at the "AEF" position when the AE Prism Finder is removed / The shutter speed dial is any other position than "RBL" when no lens is mounted or an RB lens is mounted on the camera / The battery power has dropped.

•Release locked when : The cocking lever has been set incompletely / The dark slide has not been pulled out / The shutter speed dial is at the "RBL" position when an RZ lens is used /The shutter speed dial is

at the "AEF" position when the AE Prism Finder is removed / The shutter speed dial is at any other position than "RBL" when there is no lens on the body or an RB lens is mounted on the camera.

Dimensions :108 mm (width) X133.4 mm (height) X 211.5 mm (length).

Weight :2,490g when the body (1,350g) (with Waist-Level Finder), 120 Roll Film Holder (530g) and 110 mm f/2.8 lens (610g) are combined.

• Specifications and appearance are subject to change without notice.

10