Film Speed Dial
Used to set the ISO speed of the film used.
Spool Release Pins
Depress these pins to insert or remove film.
Film Spool Stud
A new roll of film is loaded on this stud with the paper leader pulled over the roller in the direction indicated by the dotted line and arrow which appears around the stud.
Start Mark
The start mark on the backing paper must be aligned with this mark.
7
Back Cover Latch
Dark Slide
A safety feature prevents the shutter from being released unless the Dark Slide is first removed. Make it a habit to first remove the Dark Slide before attempting to take a photograph.
Lock Release Lever
Use this lever when removing the roll film holder when the
dark slide has been pulled out.
Holder Lock Lever
Should one inadvertently attempt to remove the Film Holder without first inserting the Dark Slide, the Holder Lock Lever will not unlock, thereby preventing accidental ex- posure of the film.
Take-up Spool
After removing an exposed roll of film, place the empty spool in this position.
