Datamax Ex2 manual Media Guide Adjustment

Page 26

Media Guide Adjustment

Note: It is important that the Windows print driver 'Stock' setting matches the size of the label you are using. See the Windows Driver section.

1.Unplug the printer from its power source.

2.Press down on both Printhead Latches to unlock the Printhead Carrier. Raise the Printhead Carrier to its up position.

3.Adjust the Media Guides to fit the width of your media. The guides should be positioned so that there is very little side-to-side media movement, but not so tight as to cause friction or bowing of the media.

25

Image 26

Contents Page Printer Overview Connecting Power Printer ConnectionsInterface Connection Page Ethernet Setup Automatically Obtain an IP via a Dhcp ServerIP Address Subnet Mask Gateway Page Configure Settings via The Printers Internal Web Pages Page Installing the Media Roll Loading MediaPage Loading the Peel and Present Option Page Fan-fold / External Supply Loading Continuous Label Media Media SetupMedia Setup Windows Printer Driver Reflective Mark Label Media Printer Operation Status Light Flashing Paused or Error ConditionPrinter Reset Status Light On Normal OperationMaintenance Mode Installing the Windows Driver Windows DriverSetup Tab Stock Important NotesDMXConfig Features Printer Configuration Utility DMXConfigInstalling DMXConfig Area Method Interval Maintenance and AdjustmentsCleaning Intervals Printhead Cleaning Printhead Pressure Adjustment Low Medium HighMedia Guide Adjustment Too Tight Correct