Printer Operation
The printer is equipped with a single
Control Button and Status Light.
Status Light 'On' (Normal Operation)
With the status light in the ON state the control button will function as follows:
Printer at Idle - Printer feeds media to the next label.
Printing Labels - Pauses Printer, press again to resume.
Status Light 'Flashing' (Paused or Error Condition)
The status light flashing indicates that operator attention is required. In this state the control button will function as follows:
Printer is Paused - Printer resumes normal operation;
-Press and hold for 3 seconds to cancel current print job. Error Mode - Clears error, feeds media to next label and resumes operation.
Printer Reset
The printer can be reset by pressing and holding the Control Button for at least 10 seconds, then release the button, the Status Light will turn off momentarily. Resetting the printer will clear RAM of downloaded images, fonts, label formats, and remove temporary printer configuration changes.
17