4.1.4 Other Modes
There are only three possible error conditions, they are as follows:
Error | Cause | Action |
Paper Out | The printer is out of media stock or | Replace or correctly load |
| the stock has been loaded incorrectly. | Stock. |
Head Up | The printer ‘Lid’ is not down and | Be sure the ‘Lid’ is |
| latched. | down and latched. |
Printhead | The printhead has exceeded normal | Allow |
Overheated | operating temperature. | the printhead to cool. |
Once the error condition has been satisfied the printer will automatically exit the ERROR mode and return to the OFFLINE mode. To return to the ONLINE mode and continue printing, press the Left Button once.
This mode will allow the user to verify the data received by the printer. While in dump mode, the printer will print the received data in hexadecimal.
To enter DUMP mode:
With the printer off, (both LED’s off), press and hold the Left Button until the word “DUMP” is printed.
To exit DUMP mode:
Turn the printer off, (press and hold Left Button) or disconnect power.
12 |
|