5.If the communication settings are correct press No. If they are not correct press Yes and modify them by pressing Yes to accept the setting and No to change it.
6.When the desired communication settings are chosen press Yes to enter the emulation menu.
7.You are now in the emulation menu. Press Yes to print the current setting.
8.Press No to change to ESC/POS. (If ESC/POS is already printed press Yes). Press Yes to enter the next section.
9.If no more changes are required press No until the end, and then press Yes to save your changes.
10.Your printer is now configured to work with your PC. You can use your favorite text editor to create your printouts.
4.6Changing the Default Settings
Your printer is shipped with the following standard configuration:
| Communication Parameters |
| Emulation | Character Sets |
| |||||||||||
| Speed: |
| 9600 baud |
|
| ESC/POS | Code page: |
| 850 |
| ||||||
| Data: |
| 8 bits |
|
|
|
|
|
|
| Width: |
| 12x24 |
| ||
| Parity: |
| None |
|
|
|
|
|
|
| Country: |
| USA |
| ||
| Control: |
| Hardware |
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
| |||||
| Page |
| Media |
| Other |
|
|
| ||||||||
| Line spacing: |
| 6 lpi | Media: |
| Paper |
|
| Auto LF: |
| Off | |||||
|
|
|
|
|
|
|
|
|
|
|
| Auto CR: |
| Off | ||
|
|
|
|
|
|
|
|
|
|
|
| Contrast (20%): |
| +00% | ||
|
|
|
|
|
|
|
|
|
|
|
| Contrast (5%): |
| +00% | ||
| 21 |