4.4Connecting to an ESC POS Terminal
The default configuration of your printer is ESC/POS. Check your Terminal communication parameters and change the printer settings to match your terminal settings.
Default Communication parameters
Speed: | 9600 baud |
Data: | 8 bits |
Parity: | None |
Control: | Hardware |
To check the current emulation and communication parameters of your printer:
1.Make sure that a roll of paper is loaded.
2.Set the printer to “Off”.
3.Press both buttons simultaneously until the configuration is printed.
If the configuration is not correct see section 4.4 Changing the Default Settings.
| 19 |