CPG SP40 manual Filling in the Printer Setup Forms, Do not use pencils

Filling in the Printer Setup Forms

To change the values of the parameters, fill in the marker ( ) beside the value you want to set with a black or blue ball-point pen or a fiber-pen.

Do not use pencils.

AUTOFEED SIGNAL	( )	( )
	disabled *	enabled
SLCT-IN SIGNAL	( )	( )
	disabled *	enabled
BUFFER CONTROL	( )	( )	( )
	DTR	XON/XOFF* X ON/XOFF +

If more than one value is set for a parameter, the printer ignores these parameters and

maintains the currently set value.

Do not fill in the marker beside the title of the preprinted form, otherwise the printer will not be

able to read that page.

For a detailed description of the parameters and values contained in the Configuration and Program1/Program2 Menus, see “ Setup Parameters” later in this manual.

For a detailed description of the Offset Tuning procedure, see “ Offset Adjustment” later in this manual.

30