| Setup Parameter | Values | Description |
|
|
|
|
|
|
| LINE MODE | LF=LF, CR=CR | If the printer receives a LF code (LF), it only performs a line feed. If |
|
|
|
| the printer receives a CR code (CR), it only performs a carriage |
|
|
|
| return. |
|
|
| CR=LF+CR | If the printer receives a CR code (CR), it performs a carriage return |
|
|
|
| followed by a line feed. If the printer receives a LF code (LF), it |
|
|
|
| performs a line feed. |
|
|
| LF=LF+CR | If the printer receives a LF code (LF), it performs a line feed |
|
|
|
| followed by a carriage return. If the printer receives a CR code |
|
|
|
| (CR), it only performs a carriage return. |
|
|
| LF&CR=LF+CR | If the printer receives a LF code (LF) or a CR code (CR), it |
|
|
|
| performs both a line feed and a carriage return. |
|
| WRAP MODE | truncate, | The data exceeding the line length are truncated (truncate) or |
|
|
| autowrap | printed on the following line (autowrap). |
|
| SLASHED ZERO | no, yes | Selects the printing character for zero, with a slash (yes) or |
|
|
|
| without (no). |
|
| PRINT DIRECTION | unidir., bidir., sw | Selects the printing direction of the print head: unidirectional |
|
|
| control | (unidir.), bidirectional (bidir.) or selected via software (sw |
|
|
|
| control). |
|
| EJECT ON FF | no, yes | Performs a form feed according to the selected page format (no) |
|
|
|
| or ejects a cut sheet loaded into the printer (yes). |
|
| RESET WITH EJECT | no, yes | When the printer receives a reset command, if this item is set to |
|
|
|
| yes the paper inserted in the printer is ejected. If the item is set to |
|
|
|
|
|
|
|
|
| 41 |
|