Setup Management Port
Follow these steps to define the IP addresses.
Step 1:
Click on TCP/IP Settings from Management Setup from the CONFIGURATION menu.
Step 2:
In the Management Port Setup page, refer to the table below to replace the default settings with appropriate values to suit the needs of your network.
Step 3:
Click on the Apply button to save your new parameters.
This table describes the parameters that can be modified in the Management Port Setup page.
Parameters |
| Description | |
IP Address |
| When the DHCP server of the router is enabled (unless you | |
|
|
| set a different DHCP Gateway IP Address), this LAN IP |
|
|
| Address would be allocated as the Default Gateway of the |
|
|
| DHCP client. |
|
|
| The IP address is set by default to 192.168.168.1. |
|
|
| The Network Mask serves to identify the subnet in which your |
Network |
|
| |
Mask |
|
| router resides. The default network mask is 255.255.255.0. |
|
|
| Your ISP usually provides the IP address of the DNS server. |
Primary | DNS |
| |
IP Address |
|
| |
|
| This optional field is reserved for the IP address of a | |
Secondary |
| ||
DNS | IP |
| secondary DNS server. |
Address |
|
|
|
Page 35