Configure the Advanced WLAN
Settings
Follow these steps to change the radio settings of the router.
1
1.Click on WLAN Setup from the CONFIGURATION menu.
2.Select Advanced.
1. Set the Beacon Interval (the time
2lapse between every beacon sent) to any value between 20 and 1000. It is preset as 100 seconds.
2.Set the Data Beacon Rate from 1 to 16384.
This determines how often the beacon should contain a Delivery Traffic Indication Message (DTIM) that tells
3.Set the RTS/CTS Threshold from 256 to 2346.
It is preset to 2346.
4.Set the Frag Threshold from 256 to 2346.
It is preset to 2346.
5.Transmission Power Control (TPC) offers the flexibility to set the Transmit Power. (802.11h compliant)
It is set to Maximum by default, but should be reduced if there is more than one unit using the same channel frequency.
It can be set from Minimum to Maximum, 1dBm to 20dBm, in increments or 1dBm per step.
3
1.Click Apply.
Changes will be enabled after reboot.
Page 27