NETGEAR WNDAP350-100NAS manual To configure WPA-PSK and WPA2-PSK

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual

.

Figure 2-23 Configure WPA-PSK and WPA2-PSK

To configure WPA-PSK and WPA2-PSK:

1.From the Network Authentication drop-down menu, select WPA-PSK & WPA2-PSK. By default, Data Encryption will be set to TKIP+AES.

2.Enter the WPA Passphrase (Network Key).

3.Wireless Client Security Separation is disabled by default. If enabled, associated wireless clients will not be able to communicate with each other. (This feature is intended for hotspots and other public access situations.

4.Click Apply to save your settings.

Basic Installation and Configuration 2-43

v1.1, November 2009