NETGEAR WNDAP350-100NAS manual Configuring 802.11a/na Advanced Wireless Settings

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual

•Aggregation Length (1024-65535) (11ng): The aggregation length defines the size of aggregated packets. Larger aggregation lengths may sometimes lead to better network performance. The default is 65535.

•A-MPDU (11ng): Aggregated MAC Protocol Data Unit. Aggregates several MAC frames into a single large frame to achieve higher throughput. The default is enabled.

•RIFS Transmission (11ng): Reduced Interframe Space. RIFS transmissions are shorter than other interframe spaces, and if enabled allow transmission of successive frames at different transmit powers. The default is disabled.

•DTIM Interval: The Delivery Traffic Indication Message. Specifies the data beacon rate between 1 and 255. The default is 3.

•Preamble Type (11b/bg only): A long transmit preamble may provide a more reliable connection or a slightly longer range. A short transmit preamble gives better performance. The Auto settings automatically handles both long and short preambles. The default is Auto.

•Antenna: Enable the internal or external antenna. The internal antenna is enabled by default.

•802.11d: Enable this option to include support for "additional regulatory domains" that are not in the current standard.

•Client Isolation: This option, when enabled, blocks communication between wireless clients that are associated to different VAPs. The default is Disable.

•Max Wireless Clients: The number of wireless clients that can associate with the AP at one time. The default is 63.

5.Click Apply to enable the Wireless Settings.

Configuring 802.11a/na Advanced Wireless Settings

To configure advanced Wireless Settings:

1.Under the Configuration tab, select Wireless.

2.From the sidebar, select Advanced, and then select Wireless Settings.

4-6 Advanced Configuration

v1.1, November 2009