ProSafe Dual Band
Table A-1. Access Point Default Configuration Settings
Feature | Description | |
|
|
|
| DHCP Client | Disabled |
|
|
|
| Time Zone | |
|
|
|
| Time Zone Adjusted for Daylight Saving | Disabled |
| Time |
|
| SNMP | Enabled, but Trap forwarding disabled |
|
|
|
| Spanning Tree Protocol | Disabled |
|
|
|
| Secure Telnet | Enabled |
|
|
|
Wireless |
| |
|
|
|
| Operating Mode | Access Point |
| Access Point Name | netgearxxxxxx where xxxxxx are the last 6 digits of the |
|
| wireless access point MAC address. |
| Wireless Communication | Enabled |
|
|
|
| 11a/na Wireless Network Name (SSID) | NETGEAR_11a |
|
|
|
| 11 b/bg/ng Wireless Network Name | NETGEAR_11g |
| (SSID) |
|
| Broadcast Network Name SSID | Enabled |
|
|
|
| Security | Disabled |
|
|
|
| Transmission Speed | Besta |
|
|
|
| Country/Region | Varies by region |
|
|
|
| 80211.a Radio Frequency Channel | Auto |
|
|
|
| 80211.g Radio Frequency Channel | Auto |
|
|
|
| Output Power | Full |
| Wireless Card Access List | All wireless stations allowed |
| WMM Support | Enabled |
a. Maximum Wireless signal rate derived from IEEE Standard 802.11 specifications. Actual throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate.
Default Settings and Technical Specifications |
