NETGEAR WNDAP350-100NAS manual Create security profile

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual

-dtim-interval			--wireless DTIM period in beacon interval
-extension-protection-spacing				--wireless extension protection spacing
-fragmentation-length			--wireless fragmentation threshold(even
only)
-guardinterval			--interval (from interference from other
transmissions)
-knownap-add			--add known access point
-knownap-del		--delete known access point
-macacl>			--modify wireless access control (ACL)
-add			--add wireless access control (ACL)
-del			--delete wireless access control (ACL)
-macacl-add			--add wireless access control (ACL)
-macacl-database			--delete wireless access control (ACL)
database
-macacl-del			--delete wireless access control (ACL)
-mcsrate			--transmit data rate
-mode			--enable wireless access control (ACL)
-operation-mode			--wireless operation mode
-power			--wireless transmit power
-radio	--enable wireless radio
-rate			--wireless transmission date rate
-rifs-transmission			--enable successive frame transmission at
different transmit powers
-rogue-ap-detection			--enable rogue access point detection
-rts-threshold			--wireless RTS/CTS threshold
-security-profile>		--create security profile
-1>		--1st security profile
-authentication			--authentication type
-encryption			--data encryption
-hide-network-name			--hide network name
-key1			--wireless wep key 1
-key2			--wireless wep key 2
-key3			--wireless wep key 3
-key4			--wireless wep key 4
-keyno			--key number
-name			--profile name
-presharedkey			--pre-shared key
-security-separation			--disable associated wireless client
communication
-ssid			--network name (1-32 chars)
-status			--profile status
-vlan-id			--VLAN id
-wep-pass-phrase			--wireless wep passphrase key
-wepkeytype			--wireless wep key type
-2>			--2nd security profile
-authentication			--authentication type
Command Line Reference				C-7

v1.1, November 2009