NETGEAR WNDAP350-100NAS manual Index-2

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual

rate	3-16	coverage area 1-1,2-11
SSID 3-16		CSMA/CA 4-5,4-7
state	3-16
		CSMA/CD (Carrier Sense Multiple Access with
status 3-16
		Collision Detection) 4-5,4-7
type	3-16
		CTS (Clear to Send) 4-5
wireless network name (SSID) 3-16

B

back off 1-4

Basic Service Set (BSS) 1-2

Basic Service Set Identifier (BSSID) 1-2beacon generation, support for 1-4beacon interval 4-5,4-7

bridge

network authentication 2-25

bridge mode wireless station wireless point to point bridge 4-10wireless point-to-multi-point bridge 4-10

BSSID 3-16

C

Category 5 Ethernet cable 1-6change password 3-10

channel auto

testing connectivity 2-22channel auto selection 2-22channel interference 2-22channel spacing 2-3,2-19channel spacing, recommended 2-16channel width 2-19

channel, auto

configuring channel/frequency 2-16channel, default 2-16

CLI

command set 3-4command line interface (CLI) 3-3

configuration file 3-6backup or restore 3-7

country/region, configure 2-6coverage 2-2

D

data encryption settings 128 bits WEP 2-26152 bits WEP 2-2664 bits WEP 2-26AES 2-26

none 2-26TKIP 2-26TKIP + AES 2-26

data rates 802.11a/na 2-19data rates 802.11bgn 2-17default access point name 2-6default channel 2-16,2-22default gateway, configure 2-14default IP address 2-5,2-13default password 2-5

default reset button 3-9default SSID 2-11

default SSID 802.11a/n 2-24default SSID 802.11b/g/n 2-24default user name 2-5

default wireless access point name 2-11

DHCP

point-to-multi-point bridging 4-15

DHCP client default setting 2-11

DHCP client, configure 2-13

DHCP client/server support 1-2

DHCP server configure 4-1on LAN 2-13

on LAN, assigns IP address 2-11distributed coordinated function, support for 1-4

Index-2

v1.1, November 2009