Appendix A Default Settings and Technical Specifications

This appendix provides the factory default settings and technical specifications for the ProSafe Dual Band Wireless-N Access Point WNDAP350.

Factory Default Settings

You can use the reset button located on the front of your device to reset all settings to their factory defaults. This is called a hard reset.

To perform a hard reset, push and hold the reset button for approximately 5 seconds (until the TEST LED blinks rapidly). Your device will return to the factory configuration settings shown in Table A-1below.

Pressing the reset button for a shorter period of time will simply cause your device to reboot.

Table A-1. Access Point Default Configuration Settings

Feature

Description

 

 

 

AP Login

 

 

 

 

 

User Login URL

192.168.0.237

 

 

 

 

User Name (case sensitive)

admin

 

 

 

 

Login Password (case sensitive)

password

 

 

 

Ethernet Connection

 

 

 

 

 

Static IP Address

192.168.0.210

 

 

 

 

Ethernet MAC Address

See bottom label.

 

 

 

 

Port Speed

10/100/1000

 

 

 

Local Network (LAN)

 

 

 

 

 

Lan IP

192.168.1.1

 

 

 

 

Subnet Mask

255.255.255.0

 

 

 

 

Gateway Address

0.0.0.0

 

 

 

 

DHCP Server

Disabled

 

 

 

Default Settings and Technical Specifications

A-1

v1.1, November 2009

Page 109
Image 109
NETGEAR WNDAP350-100NAS manual Appendix a Default Settings and Technical Specifications, Factory Default Settings