NETGEAR WNDAP350-100NAS manual Time zone and system time related settings

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual

–Untagged VLAN. Untagged VLANs do not cause the outbound traffic to be tagged with the VLAN ID. Also, there can be only one Untagged VLAN. The default is Enable and set to 1.

–Management VLAN. Management VLANs are used for managing traffic (Telnet, SNMP, and HTTP) to and from the Access Point. Management VLANs also cause outbound traffic to be tagged with this VLAN ID. However, if their VLAN ID is same as the Untagged VLAN ID, then the outbound traffic is not tagged. There can be only one Management VLAN.The default is 1.

8.Select Time from the left panel. The Time screen displays, as shown in Figure 2-4.

Figure 2-4 Time zone and system time related settings

9.Enter the Time Settings for your area. See the online help or “Configuring Time Settings” on page 2-8for more information about how to configure the settings on this screen.

Basic Installation and Configuration 2-7

v1.1, November 2009