NETGEAR WNDAP350-100NAS manual Create security profile

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual

transmissions)
-knownap-add				--add known access point
-knownap-del			--delete known access point
-macacl-add				--add wireless access control (ACL)
-macacl-database				--delete wireless access control (ACL)
database
-macacl-del				--delete wireless access control (ACL)
-mcsrate				--transmit data rate
-mode				--enable wireless access control (ACL)
-operation-mode				--wireless operation mode
-power				--wireless transmit power
-preamble				--wireless preamble (only effect on
802.11b	rates)
-radio				--enable wireless radio
-rate				--wireless transmission date rate
-rifs-transmission				--enable successive frame transmission at
different transmit powers
-rogue-ap-detection				--enable rogue access point detection
-rts-threshold				--wireless RTS/CTS threshold
-security-profile>			--create security profile
-1>				--1st security profile
-authentication				--authentication type
-encryption				--data encryption
-hide-network-name				--hide network name
-key1				--wireless wep key 1
-key2				--wireless wep key 2
-key3				--wireless wep key 3
-key4				--wireless wep key 4
-keyno				--key number
-name				--profile name
-presharedkey				--pre-shared key
-security-separation				--disable associated wireless client
communication
-ssid				--network name (1-32 chars)
-status				--profile status
-vlan-id				--VLAN id
-wep-pass-phrase				--wireless wep passphrase key
-wepkeytype				--wireless wep key type
-2>			--2nd security profile
-authentication				--authentication type
-encryption				--data encryption
-hide-network-name --hide network name
-key1		--wireless wep key 1
-key2		--wireless wep key 2
-key3		--wireless wep key 3
-key4		--wireless wep key 4
-keyno				--key number
C-2				Command Line Reference

v1.1, November 2009