NETGEAR WNDAP350-100NAS manual Enable Wireless Point-to-Point Bridge

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual

When you click the Edit button, you must enter the profile name and the MAC address (physical address) of the other bridge mode wireless station in the fields provided. WEP, WPA-PSK, or WPA2-PSK are supported. WPA2-PSK can (and should) be used to protect this communication.

The screens used to configure these options are located by selecting Wireless Bridge under the Configuration tab (see Figure 4-6below).

Figure 4-6 Enable Wireless Point-to-Point Bridge

To configure bridge settings on the Bridging page shown in Figure 4-6above, follow these steps:

1.Select the Enable Wireless Bridging option.

2.Select one of the bridge mode options, Wireless Point to Point Bridge, or Wireless Point to Multi-Point Bridge.

3.Select Enable Wireless Client Association, if you wish.

4.Click Edit to edit the security profile of the wireless bridge settings, as shown in Figure 4-7below.

Advanced Configuration 4-11

v1.1, November 2009