NETGEAR WNDAP350-100NAS manual Access Point Name and Country / Region

ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual

Figure 2-3 Access Point Name and Country / Region

4.Access Point Name: Enter the access point name of the WNDAP350.

This unique name is the access point NetBIOS name. The default Access Point Name is located on the bottom label of WNDAP350. The default is netgearxxxxxx, where xxxxxx represents the last 6 digits of the WNDAP350 MAC address. You may modify the default name with a unique name up to 15 characters long.

5.From the Country/Region pull-down menu, select the region where the WNDAP350 can be used (the default Country/Region is the United States).

Note: If your country or region is not listed, please check with Netgear Support.

6.Spanning Tree Protocol. Enable or disable spanning tree protocol. Spanning tree protocol enables network traffic optimization in settings with multiple WNDAP350 wirelss access points. The default is Disable.

7.802.1Q VLAN. This section allows each Security Profile to be associated with the default VLAN for WNDAP350. (Useful primarily if the hubs/switches on your LAN support the VLAN 802.1Q standard.)

2-6 Basic Installation and Configuration

v1.1, November 2009