ProSafe Dual Band
3.Then enter the new password twice, once in the New Password field and again in the Repeat New Password field.
4.Click Apply to save your change.
Enabling the SysLog Server
The SysLog screen allows you to enable the SysLog option if you have a SysLog server on your LAN.
To enable a SysLog server:
1.Under the Configuration tab on the main menu, select System, then select the Advanced option, and select SysLog to view the screen shown in Figure
Figure 3-9 Enable SysLog server
2.Enable SysLog – Enable this option if you have a SysLog server on your LAN. If enabled, you must enter the IP address of your SysLog server and the port number your SysLog server is configured to use. The default is Disabled.
3.SysLog Server IP Address – The access point will send all the SysLog to the specified IP address if SysLog option is enabled.
4.Port Number – The port number configured in the SysLog server on your LAN. Default is 514.
Management |
