ProSafe Dual Band
5.Wireless Client Security Separation is disabled by default. If enabled, associated wireless clients will not be able to communicate with each other. (This feature is intended for hotspots and other public access situations.
6.Click Apply to save your settings.
Note: If you use a wireless computer to configure WEP settings, you will be disconnected when you click Apply. Reconfigure your wireless adapter to match the new settings or access the wireless access point from a wired computer to make any further changes.
Configuring WPA with RADIUS
Not all wireless adapters support WPA. Furthermore, client software is required on the client. Windows XP and Windows 2000 with Service Pack 3 or above do include the client software that supports WPA. Nevertheless, the wireless adapter hardware and driver must also support WPA. Consult the product document for your wireless adapter and WPA client software for instructions on configuring WPA settings.
To configure WPA, follow these steps:
1.Under the Configuration tab, select Security on the main menu, select Advanced from the
2.Enter the RADIUS Server Settings as shown in “Configuring the RADIUS Server Settings” on page
3.Click Apply to save your RADIUS Server settings.
Basic Installation and Configuration |
