ProSafe Dual Band Wireless-N Access Point WNDAP350 Reference Manual

WPA-PSK (Preshared Key)

Record the WPA-PSK key. Key: ___________________________________

WPA RADIUS Settings. For WPA, record the following settings for the primary and secondary RADIUS servers:

Server Name/IP Address: Primary _________________ Secondary __________________

Port: ___________________________________

Shared Secret: ___________________________________

Use the procedures described in the following sections to configure the WNDAP350. Store this information in a safe place.

Configuring the RADIUS Server Settings

You can setup or modify the RADIUS Server settings to compliment Network Authentication security options. The RADIUS Server must be used with Legacy 802.1x, and can be used with WPA and WPA2 Network Authentication. When using a RADIUS Server, the RADIUS Server settings must be configured before completing the Network Authentication security profile (see “Configuring WPA with RADIUS” on page 2-35, “Configuring WPA2 with RADIUS” on page 2-37, or “Configuring WPA and WPA2 with RADIUS” on page 2-38for specifics on implementing these security options).

Note: The RADIUS Server Settings apply to all profiles. They only need to be configured once per wireless access point.

To set up or modify the RADIUS Server Settings:

1.From your Web browser, log in to the WNDAP350 using the default LAN address of http://192.168.0.237, user name admin and password password, or use the LAN address and password that you set up.

2.Under the Configuration tab, select Security on the main menu, select Advanced from the left panel, and then select RADIUS Server Settings. The RADIUS Server Settings screen displays, as shown in Figure 2-14.

Basic Installation and Configuration

2-29

v1.1, November 2009

Page 49
Image 49
NETGEAR WNDAP350-100NAS manual Configuring the Radius Server Settings