Setup WAN for ADSL Internet using L2TP
L2TP (Layer 2 Tunneling Protocol) is an extension to the PPP protocol used for Virtual Private Networks (VPNs) that supports multiple protocols and unregistered and privately administered IP addresses over the Internet.
1
Select L2TP as your WAN Type at Select
WAN Type page.
2
At the WAN L2TP Setup page:
1.Select whether to enable DHCP.
2.Enter Client IP Address.
3.Enter Network Mask.
4.Enter the Gateway.
5.Enter the Username of your Internet account.
6.Enter the Password of your Internet account.
7.Enter the IP address of your VPN Server.
8.Enter an Idle Timeout value between
9.The Status section gives you a summary of your connection settings such as:
•IP address
•Network Mask
•Gateway IP Address
10.If you are online, clicking Disconnect will disconnect your connection.
31. Click Apply.
2.Click Reboot button to restart the system and allow the changes to take effect.
Page 54