Before you begin, ensure that each of the routers within the network is properly configured to connect to its individual broadband Internet account. Then ensure that either:
•each of the routers is connected to an Ethernet port in the network as illustrated above or
•the routers are wired to each other.
Finally, you are ready to access the
1.Under the CONFIGURATION command menu, click on Parallel Broadband.
2.Next simply select Enable and click the Apply button to make the changes effective.
3.Repeat this for the other routers in your network
and they will communicate with each other and assign each new user to the router that has the smallest load, so
that there is approximately the same number of users on each router.
Important: If you have only one unit of the router, you DO
!NOT need to implement the Parallel Broadband feature for broadband Internet sharing.
Page 69