Cobalt Networks PS-8300 user manual MFC-8310 Controller Card LED Descriptions

Page 29

LED displays and descriptions are provided in the following table:

Table 3. MFC-8310 Controller Card LED Descriptions

LED

Color

Display and Description

 

 

 

 

Alarm

Red

When lit, an alarm condition is occurring in the frame.

(MFC-8310)

 

 

 

Status OK

Green

When lit, the MFC-8310 module is operating correctly.

(MFC-8310)

 

 

 

Comm. Activity

Yellow

When lit, the card is communicating within the frame.

(MFC-8310)

 

 

 

Fault

Red

When lit, a SMPTE alarm condition is occurring in the frame.

(CFM-8310)

 

 

 

Fan Fail

Red

When lit, a fan on the frame door or PS-8300 is stalled.

(CFM-8310)

 

 

 

 

 

When lit Green, the PS-8300 is operating normally

Power Supply

Green/

When flashing Red:

(8310)

Red

there is an output over or under voltage condition on the PS-8300

 

 

there is no A/C; provided that the second supply is operating normally

 

 

 

 

8310 User Manual (V 1.0.1)

Page 29 of 40

Image 29
Contents Cobalt Digital Inc OpenGearTM Two Rack Unit Frame Power Supply PS-8300Trademarks CopyrightSymbol Meanings Important Regulatory and Safety NoticesImportant Safety Instructions US FCC Part Product Power Cord RequirementsEMC Notices Environmental Information Maintenance/User Serviceable PartsContents Contact Us Service InformationOrdering Information This Chapter IntroductionWord of Thanks OverviewRobust Power Supplies FeaturesDocumentation Terms Unpacking Installation and SetupStatic Discharge Power Supply PS-8300 and Power Cable Installing the FrameInstalling the Frame Power Supply Hazardous VoltagesImproving Performance Fault ReportingVentilation and Cooling Color Display and DescriptionPower Cable Connection Fan Kit InstalledCable Connections Without Fan KitBNC Rear I/O Module Rear I/O ModulesSmpte Alarm Connector Rear I/O Module InstallationDual Reference Connectors OpenBUS ConnectorEthernet Connector Smpte 269M Fault Reporting Option Details Frame ConnectionsTechnical Specifications SpecificationsEnvironmental Smpte FaultReporting Important Notes Frame Features Fan Board Installation Instructions Cooling FeaturesInstalling the Cooling Fan Module Cooling Fan Functions and User Controls Frame Door FeaturesFunctions of the Controller Card Installing the Controller CardAlarm Mute Button MFC-8310 Alarm Configuration JumperControls and LEDs for the Controller Card MFC-8310 LEDsMFC-8310 Controller Card LED Descriptions Installing the Network Controller Card Remote Control Networking FeaturesEthernet Setup Functions of the Network Controller CardControls and LEDs for the Network Controller Card MFC-8310-N DIP SwitchesMFC-8310-N LEDs DIP Switches on the MFC-8310-NButtons on the MFC-8310-N Color Location Display and Description DashBoard and DashBoard Lite Control System SoftwareSnmp Monitoring and Control Operating Tip Configuring SnmpEnabling Snmp Rear Support Bars and Brackets Installing the Rear Support Bars and BracketsFrame Controller Alarm Mute/Bootload Button Service InformationTroubleshooting Checklist Case of Problems Warranty and Repair PolicyOptional Equipment Ordering InformationStandard Equipment Page Visit us at the Cobalt Digital Inc. website Contact UsContact Cobalt Digital Inc