Citizen Systems CBM-920 manual To avoid injury and prevent damage from spreading

Page 10

CBM-920 User’s Manual

CAUTION FOR HANDLING

Do not carry out the following operation, since they may be cause of breakage.

Do not carry out blank printing in the condition where there is no recording paper and no ink ribbon in the unit, this may make a damage to print head.

Do not drop any foreign subjects like paper clips, or splits pins, etc. into the printer unit.

Do not spill any drinks or chemical liquid onto the printer units.

Do not subject this equipment to excessive force shocks such as by treading on it, dropping it or hitting it.

Do not operate the operation panel using sharp objects such as the top of a pen etc.

Do not pull the paper in printer forcibly by hand or pull the paper in opposite way to paper feed direction.

Change ink ribbon cassette before the ink of this ribbon completely runs out. In case the ribbon is teared by the excess in use, this may cause the abnormality in printing. Do not supply the ink with this ribbo n cassette.

Do not carry the printer unit setting the ribbon cassette in printer.

To avoid injury and prevent damage from spreading.

Do not touch the printing portion of print head.

During operation, do not touch moving parts such as gears, or the electrical parts in side the printer units.

Take care not to injure yourself or other objects from the edge of the sheet metal.

If an abnormality occurs during use, immediately stop using the printer and remove the power cable from the power source outlet.

If a breakage occurs, do not attempt to disassemble the equipment. Be sure to leave the repair of this equipment to Service personnel.

Take care not to put your hands or fingers between the panel during opening and closing the panel.

4

CITIZEN

Image 10
Contents Impact DOT Matrix Printer Model CBM-920 Page Declaration of Conformity Important Safety Instructions Sicherheitshinweis Citizen Possibility of the occurrence of death or serious injury Citizen Precautions for Installation To avoid injury and prevent damage from spreading Ordinary Maintenance Contents DIP Switch Setting Print Control Function Accessories FeaturesOutline Power Supply General SpecificationsModel classifications Specifications CBM-920-24 CBM-920-40Outer Appearance and Explanation of Each Part Outer Appearance and Explanation of Each PartExplanation of Each Part Operation Rack MountingPower Supply Connection Panel Opening/Closing Opening/Closing of Front PanelSetting Ribbon Cassette Paper FeedingSetting Printing Paper RemarkRemark Self-Printing Function Paper Near End Auto Loading Function Connector Pins Configuration Parallel InterfaceExplanation of Input/Output Signals ACK BusyElectrical Characteristics O Conditions Serial Interface Connector Connection Diagram DTR Data Terminal ReadyData Configuration Error Detection Citizen DIP Switch Setting DS1Control code list Print Control FunctionPrint Result Dip switch setting CR = CR + LF Input data formatReceive data Print result Citizen Citizen Status of registration ESC Cotizen NEW Products ESC P a N C B M Citizen Citizen Citizen Citizen Citizen After filling the data specified in n1, n2, n3 Con-duct buffer full printing automatically Character SET Japanese character code tableInternational character code table Character code table Citizen Outline Drawing