Citizen Systems CBM-920 manual Explanation of Each Part

Page 18

CBM-920 User’s Manual

3.2Explanation of Each Part

1

Interface Connector

Connected to various hosts via cables. On connection, confirm beforehand that power

 

 

supply of the host and the printer are OFF. The power cable, also, is held in this

 

 

connector.

 

 

Make sure to connect FG terminal with an earth. Do not connect this terminal with the

 

 

lines except for an earth.

2

Feed Switch

With this switch pressed, paper is fed. Use this to insert paper and to put space. With

 

 

pushing this switch, power is turned ON, self -print function is conducted.

3

Paper Lamp

Lights up when paper has become scarce or run out.

 

 

(Only when Paper Near End/Paper End function has been set.)

 

 

Put out when paper has been inserted.

4

Knob

Use this to set paper or to open the front cover on changing of paper.

5

Front Cover

Open/close this on setting or changing of paper.

6

Ribbon Cover

Open/close this to change ink ribbon.

 

 

This opens when the left side of the front face is pulled forward.

7

Mounting bracket

Use this to fix the main body to a rack, etc.

8

Paper Holder

Paper setting section.

 

 

Placing paper from the insertion port, set paper.

12

CITIZEN

Image 18
Contents Impact DOT Matrix Printer Model CBM-920 Page Declaration of Conformity Important Safety Instructions Sicherheitshinweis Citizen Possibility of the occurrence of death or serious injury Citizen Precautions for Installation To avoid injury and prevent damage from spreading Ordinary Maintenance Contents DIP Switch Setting Print Control Function Features AccessoriesOutline General Specifications Power SupplyModel classifications Specifications CBM-920-24 CBM-920-40Outer Appearance and Explanation of Each Part Outer Appearance and Explanation of Each PartExplanation of Each Part Operation Rack MountingPower Supply Connection Panel Opening/Closing Opening/Closing of Front PanelSetting Ribbon Cassette Paper FeedingSetting Printing Paper RemarkRemark Self-Printing Function Paper Near End Auto Loading Function Connector Pins Configuration Parallel InterfaceExplanation of Input/Output Signals ACK BusyElectrical Characteristics O Conditions Serial Interface Connector Connection Diagram DTR Data Terminal ReadyData Configuration Error Detection Citizen DIP Switch Setting DS1Control code list Print Control FunctionPrint Result Dip switch setting CR = CR + LF Input data formatReceive data Print result Citizen Citizen Status of registration ESC Cotizen NEW Products ESC P a N C B M Citizen Citizen Citizen Citizen Citizen After filling the data specified in n1, n2, n3 Con-duct buffer full printing automatically Character SET Japanese character code tableInternational character code table Character code table Citizen Outline Drawing