Citizen Systems CBM-920 manual Citizen

Page 48

CBM-920 User’s Manual

d-2) In case of multi-characters registration

By conducting one character registration continuously, 8 characters can be registered at maximum.

In case multi-characters are registered into continuous address (character codes), in specifying the address to start registration is A1 and the address to finish registration is A2, maximum 8 characters can be registered.

Remarks) A1 < A2, A2-A1 = < 7

[Configuration of pattern data] In case of 24 columns model

The pattern data to be registered for one character is 6 byte. This means the pattern comprises 6 8 dots matrix is decomposed to 6 portions divided to the direction of lengthwise. The data of 6 bytes in total is to be transmitted as each one bytes data.

<Example> In case the following pattern file is transmitted.

[Print of registered characters]

In case of printing the registered characters, these characters are printed by command (CR, LF, ESC + "B" + n) at same print condition as the other internal characters.

42

CITIZEN

Image 48
Contents Impact DOT Matrix Printer Model CBM-920 Page Declaration of Conformity Important Safety Instructions Sicherheitshinweis Citizen Possibility of the occurrence of death or serious injury Citizen Precautions for Installation To avoid injury and prevent damage from spreading Ordinary Maintenance Contents DIP Switch Setting Print Control Function Features AccessoriesOutline General Specifications Power SupplyModel classifications Specifications CBM-920-24 CBM-920-40Outer Appearance and Explanation of Each Part Outer Appearance and Explanation of Each PartExplanation of Each Part Operation Rack MountingPower Supply Connection Panel Opening/Closing Opening/Closing of Front PanelSetting Ribbon Cassette Paper FeedingSetting Printing Paper RemarkRemark Self-Printing Function Paper Near End Auto Loading Function Connector Pins Configuration Parallel InterfaceExplanation of Input/Output Signals ACK BusyElectrical Characteristics O Conditions Serial Interface Connector Connection Diagram DTR Data Terminal ReadyData Configuration Error Detection Citizen DIP Switch Setting DS1Control code list Print Control FunctionPrint Result Dip switch setting CR = CR + LF Input data formatReceive data Print result Citizen Citizen Status of registration ESC Cotizen NEW Products ESC P a N C B M Citizen Citizen Citizen Citizen Citizen After filling the data specified in n1, n2, n3 Con-duct buffer full printing automatically Character SET Japanese character code tableInternational character code table Character code table Citizen Outline Drawing