Citizen Systems iDP-3535 user manual 14/38

Page 14

iDP-3535 User’s Manual

Using Fan-fold Paper

1)Remove the printer cover.

2)Set the imprint face of the paper down ward and put into the paper entrance.

3)If necessary to adjust the sprocket-wheel’s position, free the wheels using the lever on both side. Slide them to the appropriate position, and lock them back.

4)Hook some of the paper’s perforations on the sprockets and forward the paper into the printer mechanism by pulling and turning the paper-feed knob until the paper’s tip reaches the platen.

5)The unlock the levers of the sprocket and match the marks (3 or 3.5 inches) with the width of the paper. Then lock them back.

Fig. 8

CITIZEN

14/38

Page 13 Page 15
Image 14
Page 13 Page 15
Contents User’s Manual Important Safety Instructions IDP-3535 User’s Manual Contents Introduction Basic Specifications Features IDP3535F IDP3535P External Appearance and Parts Descriptions GND 10/38 Preparation 12/38 13/38 14/38 15/38 Usage of the CONNECTORS, Please see page 18 DTR FaultSerial Interface MAX232 or equivalent 19/38 20/38 STB ACK, BUSY, STB, FAULT, ResetoptionParallel Interface ACK Busy GNDData ACK74LS373 or equivalent Or equivalent only for Reset 24/38 France Germany England Dip-Switch SettingOFF DC3 OFF 27/38 PIN Signal Functions PIN 30/38 BEL Print Control FunctionsCan SUB32/38 SUB1A Initial Setting Maintenance Character Code Table Individual Country Character Codes External Dimensions
Top Page Image Contents