iDP-3535 User’s Manual
(5) Form Feed
FF(0C)
With this code, paper feed goes on. If there is data in the buffer when this code is input, the printer does from feed printing. The top of form for the next page is made in accordance with the page length which was specified
with ESC + “C” + “n”.
Top of position of the page is determined when power is turned on or when page length is specified with ESC + “C” + “n”.
(6) Canceling
CAN(12)
All the data in one line prior to CAN are cleared entirely with this code.
(7)Cash drawer control
BEL(07)
Command to drive the drawer port 1 for 0.2 second period.
DIP switch
(8) Drawer 2 control
SUB(1A)
With this code, the drawer port 2 is driven for 0.2 second period.
The drawer command can be set at any place in one line. In case the data are stored in the print buffer when the command is recognized, the command is executed after the contents of the buffer are printed. In case the data are not stored in the buffer, the command is executed immediately.
CITIZEN | 33/38 |