Citizen Systems iDP-3535 user manual DC3 OFF

iDP-3535 User’s Manual

7-2 Dip-Switch (DS-2) Setting (only for Serial Interface)

	No.			Functions	ON	OFF		Factory
								Setting
	1			to chose
			Word's Length		7 bit	8 bit		OFF
	2		Parity Checking		No	Yes		ON
	3		Parity Checking		Even	Odd		OFF
	4			Baud rate	- see the table below -			OFF
	5			Setting				ON
	6		On-Line Mode *1		DC3	DC3		OFF
					LF code	DESELECT code
	7		- not used -					OFF
	8		- not used -					OFF
Baud rate Selection
		No.		1200	2400	4800	9600
		4		OFF	ON	OFF	ON
		5		OFF	OFF	ON	ON

*1

Your iDP3535 Dot Matrix Printer (Serial Interface model only) has been upgraded to provide you with a new feature is called ‘OLMODE’ or ON - Line Mode. In this mode, the SEL (select) switch on

the operator panel is not used and the printer is always in the ‘SEL’ (selected) or ON – Line Mode. Also, the LF (linefeed) switch on the operator panel will function while the printer is this mode, even when the printer is in the ‘SEL’ (selected) Mode.

This feature is activated by placing the Dip Switch DS-2, Number 6 in the ‘ON’ position.

CITIZEN 26/38